Knowledgebase: Installation
A Call to SSPI failed
Posted by Eric Hanig on 09 January 2014 08:16 PM

This normally means that your system is not setup correctly.

1)      Make sure that your time and time zones are the same on all the computers.  If you get an SSPI error, this can mean the timing is off.

2)      Make sure .net 3.5 and 4.0 are installed on the servers running the engine and agent.

3)      Make sure the firewall is OFF on all related computers.  By default it normally is on.

4)      Check the DNS and that it can be resolved.  If it won’t work, use the IP address instead.

5)      Check the User Name and password settings in the WorkFlowEngine.xml file

(0 vote(s))
Not helpful

Comments (0)